Friday, June 1, 2018
DOWNLOAD KINGZONE K1 TURBO STOCK ROM FIRMWARE
DOWNLOAD KINGZONE K1 TURBO STOCK ROM FIRMWARE
Kingzone K1 Turbo Quick ReviewKingzone K1 Turbo runs on Android 4.4 KitKat.
This device is a 5.5-inch ips touchscreen display with a resolution of 1080 X 1920 pixels. A size of 153.5 x 76 x 6.8 mm and weighs about 186g.
This device is a 5.5-inch ips touchscreen display with a resolution of 1080 X 1920 pixels. A size of 153.5 x 76 x 6.8 mm and weighs about 186g.
Powered by 1.7GHz octa-core processor MediaTek MT6592 with Mali-450MP and 2GB of RAM. There�s also 16GB of internal storage which can be expanded up to 64GB with microSD.
There is a 14MP primary camera with LED Flash and a 8-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA network mode. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 3200Mah non-removable battery
DOWNLOAD KINGZONE K1 TURBO STOCK ROM
KINGZONE_K1_TURBO_Android_4.4
KINGZONE_K1_TURBO_Android_4.4
DOWNLOAD ROM
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(cant power on, cant charge and will not be detected by a computer)
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.
